-
CAMWorks® VoluMill™ is ideal for complex 3-D shapes and prismatic parts as its algorithms result in more intelligent toolpaths to machine pockets, slots, and arbitrary shapes. VoluMill is well suited for machining soft as well as hard materials that are hard to chip, such as titanium, nickel-based alloys or stainless steel. The result is increased efficiency and utilization of machines, tools, labor and materials.
Program Smarter, Machine Faster! The high-performance roughing module, which is fully integrated in CAMWorks, combines optimal milling paths and maximum material removal with minimized machining times. VoluMill’s unique approach to high speed material removal allows the programmer to determine the optimum material removal rate for any combination of part geometry, material, machine, and cutting tool. Material is removed in the most effective way possible. Consequently, machines run smoothly and tools run cooler.
- Reduce your Cycle Times up to 80%
- Reduce your programming times up to 50%
- Increase your Cutting Tool Life up to 500%
Contact Information:Email: camworks.inquiries@hcl.comWebsite: https://www.camworks.com/findresellers -
VoluMill™ within Cimatron E offers expanded milling solutions for cutting methods that maximize material removal rates by building toolpaths that optimally control tool cutting factors. The process automatically takes into account the best option for milling pockets, including the speed of a tool plunging into the material and material removal rates. Variation in tool load is smoothed, allowing the machine to use much higher speeds and feeds.
Contact Information:Email: info@cimatron.comWebsite: Cimatron -
Dynamic . Excellence – worldwide Digitization is changing our world both quickly and radically. The switch to digitization requires fundamental further development which can only be achieved globally and jointly, in strong partnerships and on an equal footing. DMG MORI continues to develop positively – technologically, structurally and culturally. Our business is marked by Dynamic and Excellence.
Contact Information:Email: Website: -
VoluMill™ within GibbsCAM offers expanded milling solutions for cutting methods that maximize material removal rates by building toolpaths that optimally control tool cutting factors. The process automatically takes into account the best option for milling pockets, including the speed of a tool plunging into the material and material removal rates. Variation in tool load is smoothed, allowing the machine to use much higher speeds and feeds.
VoluMill for GibbsCAM is only available through authorized GibbsCAM resellers. To locate your local GibbsCAM reseller, please go to the GibbsCAM website, contact GibbsCAM Sales, or call 1-800-654-9399.
Contact Information:Email: sales@gibbscam.comWebsite: VoluMill GibbsCAM Edition -
VoluMill™ within Lemoine RTM offers expanded milling solutions for cutting methods that maximize material removal rates by building toolpaths that optimally control tool cutting factors. The process automatically takes into account the best option for milling pockets, including the speed of a tool plunging into the material and material removal rates. Variation in tool load is smoothed, allowing the machine to use much higher speeds and feeds. VoluMill™ for RTM is only available from Lemoine Technologies resellers.
Contact Information:Email: info@lemoinetechnologies.comWebsite: https://www.lemoinetechnologies.com -
Missler Software has chosen to integrate VoluMill machining strategies into TopSolid’Cam 7.8 to be able to offer its customers the best algorithms on the market for toolpath calculation. VoluMill toolpaths use smooth, flowing motion, eliminating sharp directional changes and variances in tool load. Using VoluMill in place of traditional roughing routines will reduce your cycle times, extend the life of your cutting tools, and place considerably less stress on your machine tools, thereby reducing your costs while increasing your productivity.
Depending on the material and topology in question Missler Software has observed significant time gains in machining operations, extended tool and machine life thanks to the use of VoluMill. Completely integrated with TopSolid’Cam, VoluMill is available as an option in TopSolid’Cam 7.8.
Contact your local TopSolid reseller for details and availability regarding VoluMill for TopSolid.
Contact Information:Email: Website: https://www.topsolid.com/how-to-buy/find-topsolid-reseller.htm -
Numerical Control Computer Sciences (NCCS) is dedicated to providing state of the art CAD/CAM software solutions to the manufacturing industry with special emphasis in the complex four- and five-axis CAM software. Our goal is to assist our users with complex design and intricate machining, in addition to providing outstanding training, service and support.
Contact Information:Email: info@nccs.comWebsite: https://www.nccs.com -
Strategy for high-performance cutting (HPC)
Milling with hyperMAXX®.
High-performance cutting means greater material removal due to large infeed depth and a smaller lateral infeed. The hyperMAXX® roughing strategy avoids full cutting, sharp corners and edges in the path, thereby preventing abrupt changes in direction that drastically reduce the feedrate. This is how we achieve consistent cutting conditions and thereby constant tool load. Feedrates and infeeds no longer have to be entered as a precaution for unfavourable local conditions; instead, the programmer can work from the best-case scenario.
Depending on the existing cutting conditions, hyperMAXX® dynamically adjusts the feedrate to attain the maximum possible feedrate at all times. This enables the highly efficient material removal with high process stability, thereby reducing machining times significantly. hyperMAXX®is suitable for the machining of both hard and soft materials.
VoluMill-hyperMAXX® for hyperMILL® is available only through
authorized OPENMIND Resellers. To locate your local hyperMILL reseller,
please go to the OPEN MIND website, contact OPEN MIND Sales,
or call 1-888-516-1232.Contact Information:Email: Info.Americas@openmind-tech.comWebsite: https://www.openmind-tech.com -
Celeritive Technologies, developers of VoluMill and VoluTurn, is one of the world's leading CAD/CAM technology innovators specializing in science-based toolpath solutions for the manufacturing industry. The guiding philosophy at Celeritive is to develop and supply economical and simple to implement toolpath generation solutions that allow CNC machine tools and cutting tools to operate at peak performance. Through dramatically reduced cycle times, manufacturing operations become more profitable, flexible, competitive, and maximize return on their capital investments.
Contact Information:Email: sales@volumill.comWebsite: https://www.volumill.com -
SOLIDWORKS® CAM is a fully integrated, Knowledge Based technology that allows you to integrate design and manufacturing processes under one system to evaluate designs earlier in the process to avoid unexpected costs and delays in finishing products on time. It leverages the rich content in the 3D CAD model to speed up product development and reduce error prone, time consuming, repetitive manual steps in the current development process, like programming CNC machines. Knowledge Based Machining (KBM) is the foundation for streamlining the programming process, learning as you program which frees up your time to focus on the critical areas of the components.
SOLIDWORKS CAM is an add-in to all versions of SOLIDWORKS Desktop. It provides you with the ability to:
- Recognize certain types of geometry not only as CAD features, but to understand how much those features will be manufactured, and even how much it will cost to manufacture
- Read tolerances and surface finishes and make decisions about how to manufacture the product
- Automatically apply best manufacturing strategies that you like to use so that manufacturing processes can be not only faster, but also more standardized
- Automate quoting and compare it to traditional methods to ensure all aspects of the part are accounted for ahead of time
Features also include:
- Model Based Definition (MBD) is leveraged to ensure machining strategies are automatically adjusted based on tolerance specifications
- Automatic Feature Recognition allows prismatic parts to be automatically programmed while referencing programming standards
- 2.5 axis functionality including part & assembly machining
Contact Information:Email: Website: https://www.solidworks.com/product/solidworks-cam -
ZWSOFT is an international CAD/CAM software provider through its network of over 300 partners in 80+ countries and regions. Its product ZW3D is an integrated CAD/CAM solution designed for the complete product development process, features the fastest kernel, non-solid mold parting and smart CNC Machining tactics from 2-axis to 5-axis.
Contact Information:Email: ziyk@zwsoft.comWebsite: https://www.zwsoft.com